Skip to main content

SAFE. RUGGED. RELIABLE.

Power Distribution for Marine & Shipbuilding Markets

Walther Electric provides power distribution systems for Ship-to-Shore, On-Board, Pier Side Power, Generators and Temporary Portable Power. Since 1897, Walther has been known for its innovative design and manufacturing capabilities for not only meeting, but oft en exceeding the industry requirements for higher safety demands, better performance and standardized electrical systems. Transorfm high voltages into usable 480/240/208/120 volt GFI protected power distribution solutions for welding, cutting, cranes, machinery, power tools, on-board entertainment events and more.

Portable Temporary Power Distribution Units

649106I4 - UL Listed

60A, 3-PH, 3-Pole, 4-Wire

480VAC, Three Phase single tier PDU with input: (1) 60A IEC60309 IP67, 3-Pole, 4 Wire, 90° Angled inlet, Output: (3) 30A IEC60309 IP67, 3-Pole, 4 Wire straight receptacles protected by (3) 30A 3-Pole circuit breakers.

649110IMN01 Power Distribution Unit (PDU)
649110IMN01 - UL Listed

100A, 1-PH, 2-Pole, 4-Wire

125/250VAC, Single Phase single tier PDU with Input: (1) 100A IEC60309 IP67, 2-Pole, 4 Wire inlet, Output: (2) 50A CS6369 CS Type, 2-Pole, 4 Wire receptacles protected by (2) 50A 2-Pole circuit breakers.

649106I3402 Power Distribution Unit (PDU)
649106I3402 - UL Listed

60A, 3-PH, 3-Pole, 4 Wire

480VAC, Three Phase single tier PDU with Input: (1) 60A IEC60309 IP67, 3-Pole, 4 Wire, 90°Angled inlet, Output: (2) 30A Meltric, 3-Pole, 4 Wire receptacles protected by (2) 30A 3-Pole circuit breakers.

64920620M Power Distribution Unit (PDU)
64920620M - UL Listed

60A, 1-PH, 2-Pole, 4 Wire

Single Phase double tier PDU with Input: (1) 60A Meltric DS60, 2-Pole, 4 Wire Inlet Output: (8) 20A Duplex GFCI receptacles, with weather cover, (2) 20A NEMA 6-20, 2-Pole, 3 Wire receptacles with weather cover protected by (8) 20A 1-Pole circuit breakers, (2) 20A 2-Pole circuit breakers.

649230CU Power Distribution Unit (PDU)
649230CU - UL Listed

300A, 3-PH, 3-Pole, 5 Wire

120/208VAC, Three Phase double tier PDU with Input: (5) E16 Camloks, 3-Pole, 5 Wire, Output: (8) 50A CS Type, 2-Pole, 4 Wire receptacles with weather cover protected by (8) 50A 2-Pole circuit breakers.

649306I34 Power Distribution Unit (PDU)
649306I34 - UL Listed

400A, 3-PH, 3-Pole, 4-Wire

480VAC, Three Phase three tier PDU with Input: (1) 60A IEC60309 IP67, 3-Pole, 4 Wire, 90° Angled inlet, Output: (4) 30A IEC60309 IP67, 3-Pole, 4 Wire receptacles protected by (4) 30A3-Pole circuit breakers.

649310I Power Distribution Unit (PDU)
649310I - UL Listed

200A, 3-PH, 3-Pole, 5 Wire

480VAC, Three Phase three tier PDU with Input: (1) 100A IEC60309 IP67, 3-Pole 4 Wire inlet, Output: (1) 60A IEC60309 IP67, 3-Pole 4 Wire receptacle, (4) 30A IEC60309 IP67, 3-Pole 4 Wire receptacles protected by (1) 60A 3-Pole circuit breaker, (4) 30A 3-Pole circuit breakers

649322C Power Distribution Unit (PDU)
649322C - UL Listed

200A, 3-PH, 3-Pole, 5 Wire

120/208VAC, Three Phase three tier PDU with Input: (5) E16 Camloks, 3-Pole, 5 Wire, Output: (4) 50A CS Type, 2-Pole, 4 Wire receptacles, (2) 30A Twist lock, NEMA L5-30R, 1-Pole 3 Wire receptacles, (4) 20A Duplex GFCI protected by (4) 50A 2-Pole circuit breakers, (2) 30A 1-Pole circuit breakers, (4) 20A 1-Pole circuit breakers.

649322I Power Distribution Unit (PDU)
649322I - UL Listed

100A 3PH 3 Pole 5 Wire

120/208VAC, Three Phase three tier PDU with Input: (1) IEC60309 IP67, 3-Pole, 5 Wire inlet , Output: (4) 50A CS Type, 2-Pole 4 Wire receptacles, (2) 30A Twist lock, NEMA L5-30R, 1-Pole 3 Wire receptacles, (4) 20A 5-20 Duplex GFCI protected by (4) 60A 3-Pole circuit breakers, (2) 30A 1-Pole circuit breakers, (4) 20A 1-Pole circuit breakers.

HEB362U Power Distribution Unit (PDU)
HEB362U - UL Listed

40A, 3-PH, 3-Pole, 5-Wire

120/208VAC, Three Phase one tier PDU with Input: (1) 60A IEC60309 IP67, 3-Pole, 5 Wire inlet,Output: (6) 20A Duplex GFCI receptacles with weather cover protected by (6) 20A 1-Pole circuit breakers.

682104TSPWU - UL Listed
682104TSPWU Portable Power Distribution

30A, 1-PH, 2-Pole, 4-Wire

7.5 KVA Single Phase step down transformer, 480V Primary, 120/240 Secondary voltage, Input: (1) 30A IEC60309 IP67, 3-Pole, 4 Wire inlet, Output: (2) 20A 5-20 Duplex, GFCI receptacles protected by (1) 30A 2-Pole circuit breaker, (1) 50A 2-Pole circuit breaker, (4) 20A 1-Pole circuit breakers.

BK40C34MS
BK40C34MS Power Distribution System (PDS)

400A, 3-PH, 3-Pole, 4-Wire

360A/480VAC, Three Phase stainless steel power distribution with a modular state of the art enclosure with Input: (4) E16 Camlocks, 3-Pole, 4 Wire, Output: (6) 60A IEC60309, IP67, 3-Pole, 4 Wire, 15°Angled receptacles protected by (1) 400A 3-Pole disconnect switch (main), (6) 60A 3-Pole molded case circuit breakers.

BK40C34MS Side A Power Distribution System (PDS)
BK40C34MS Side B Power Distribution System (PDS)

POWER DISTRIBUTION ACCESSORIES

Cable Assemblies

Walther Electric’s heavy-duty Non-NEMA standard industrial cable assemblies are constructed and designed especially for use with our HEB Series temporary portable Power Distribution Units (PDU). Connect generator or temporary power pole to HEB PDU 50A inlet to safely distribute power to welding, cutting, cranes, machinery, power tools, on-board entertainment events and more.. Perfect for anywhere you need industrial temporary power.

H2CA25F 25ft Twist-Lock Power Cord
25 ft Twist-Lock Generator-to-PDU Power Cord - H2CA25F (Non-NEMA)

Twist-Lock generator power cord is 25ft in length and intended for DRY INDOOR/DRY OUTDOOR use. Constructed with high-quality materials to resist exposure to oil, acids, alkalis, heat, moisture and most chemicals

H2CA50F 50 ft Twist-Lock Power Cord
50 FT TWIST-LOCK Generator-to-PDU Power Cord - H2CA50F (Non-NEMA)

Twist-Lock generator power cord is 50ft in length and intended for DRY INDOOR/DRY OUTDOOR use. Constructed with high-quality materials to resist exposure to oil, acids, alkalis, heat, moisture and most chemicals

H2CA100F 100 ft Twist-Lock Power Cord
100 FT TWIST-LOCK Generator-to-PDU Power Cord - H2CA100F (Non-NEMA)

Twist-Lock generator power cord is 100ft in length and intended for DRY INDOOR/DRY OUTDOOR use. Constructed with high-quality materials to resist exposure to oil, acids, alkalis, heat, moisture and most chemicals

Custom Cable Assemblies
Custom Cable Assemblies

 

Need a certain length? Just ask!

Download the Custom Cable Assembly Quote Request Form or speak with a Walther team member +1 (800) 925-8437

RELIABLE, FLEXIBLE CABLE PROTECTION OPTIONS

Cable Protectors

Our cable bridges come in multiple variants to best suit your working environment or venue. One- to five-channel cable protectors are available ensuring a safer crossing for vehicles and pedestrian traffic while protecting valuable industrial electrical cables from damage. 30° curved elements can be used to create arcs of up to 90°

Learn more about Walther Cable Protectors >>


Downloads

  • Portable Power Distribution Units (PDU) & Accessories 19.65 MBPower Distribution Systems (PDS) & Portable Power Distribution Units (PDU). Safely centralize and distribute power from temporary power poles or job-site generator. Fitted with multiple outputs, Serge Protection included. Stock and custom units available.
  • Cable Protectors Catalog 2.34 MBA cable raceway or cable bridge is an enclosed conduit that forms a physical pathway for electrical wiring. Cable Raceways protect wires and cables from heat, humidity, corrosion, water intrusion and general physical threats.
  • Cable Protectors: Choosing the right model 577 KBCable Protection systems are offered in a variety of sizes to suit all types of INDOOR/OUTDOOR applications