Skip to main content

Product Specification Sheets for IEC 60309 Pin & Sleeve CEE Typ Devices

All specifications are subject to change without notice. Consult a Walther Electric Engineer for the latest specifications or speak with a member of our Customer Care Team +1 (800) 925-8437. Didn't find what you were looking for? Reach out to our marketing department marketing©waltherelectric.com

North America AMP Ratings

Our products are "dual rated" for different product safety standards around the world. The electrical connector will always be rated for what each country allows based on how the different agencies test and rate these industrial electrical components.

This chart is used to indicate the voltage and frequency in accordance to IEC 60309-1 (Series II). The system has been designed to maximize safety, avoid mismatching, and promote interchangeability among manufacturers. A clock face is used to represent the location of the ground sleeve for a specific voltage system. The positions of the ground pins are relative to the socket’s keyway and are designated as a clock hour position depending on the voltage rating of the part.

In North America, the color orange is reserved for devices for 125/250 V~ and the color gray is reserved for devices for 277 V~.

20 AMP - IEC 60309 PIN & SLEEVE DEVICES // NORTH AMERICA

All 20 amp IEC 60309 industrial wiring devices are rated up to 20 amps and approved by UL/CSA for 20 amp service in North America.

20 AMP Male Plugs

* NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

20 AMP FEMALE CONNECTORS (COUPLERS)

* NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

20 AMP MALE INLETS (APPLIANCE PLUGS)

* NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

30 AMP - IEC 60309 PIN & SLEEVE DEVICES // NORTH AMERICA

All 30 amp IEC 60309 industrial wiring devices are rated up to 32 amps and approved by UL/CSA for 30 amp service in North America.

30 AMP MALE PLUGS

* NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

30 AMP FEMALE CONNECTORS (COUPLERS)

* NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

30 AMP MALE INLETS (APPLIANCE PLUGS)

* NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

30 AMP FEMALE RECEPTACLES (PANEL SOCKETS)

* NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

60 AMP - IEC 60309 PIN & SLEEVE DEVICES // NORTH AMERICA

All 60 amp IEC 60309 industrial wiring devices are rated up to 63 amps and approved by UL/CSA for 60 amp service in North America.

60 AMP MALE PLUGS

* NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

60 AMP FEMALE CONNECTORS (COUPLERS)

* NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

60 AMP MALE INLETS (APPLIANCE PLUGS)

    * NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

    60 AMP FEMALE RECEPTACLES (PANEL SOCKETS)

    * NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

    100 AMP - IEC 60309 PIN & SLEEVE DEVICES // NORTH AMERICA

    All 100 amp IEC 60309 industrial wiring devices are rated up to 125 amps and approved by UL/CSA for 100 amp service in North America.

    100 AMP MALE PLUGS

    * NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

    100 AMP FEMALE CONNECTORS (COUPLERS)

    * NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

    100 AMP MALE INLETS (APPLIANCE PLUGS)

    * NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

    100 AMP FEMALE RECEPTACLES (PANEL SOCKETS)

    * NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.


    International AMP Ratings

    Our products are "dual rated" for different product safety standards around the world. The electrical connector will always be rated for what each country allows based on how the different agencies test and rate these industrial electrical components.

    16 AMP - IEC 60309 PIN & SLEEVE DEVICES // INTERNATIONAL

    All 16 amp IEC 60309 industrial wiring devices are rated up to 20 amps and approved by UL/CSA for 20 amp service in North America.

    16 AMP MALE PLUGS

    * NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

    16 AMP FEMALE COUPLERS (CONNECTORS)

    * NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

    16 AMP MALE APPLIANCE PLUGS (INLETS)

    * NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

    16 AMP FEMALE PANEL SOCKETS (RECEPTACLES)

    * NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

    32 AMP - IEC 60309 PIN & SLEEVE DEVICES // INTERNATIONAL

    All 32 amp IEC 60309 industrial wiring devices are rated up to 32 amps and approved by UL/CSA for 30 amp service in North America.

    32 AMP MALE PLUGS

    * NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

    32 AMP FEMALE COUPLERS (CONNECTORS)

    * NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

    32 AMP MALE APPLIANCE PLUGS (INLETS)

      * NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

      32 AMP FEMALE PANEL SOCKETS (RECEPTACLES)

      * NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

      63 AMP - IEC 60309 PIN & SLEEVE DEVICES // INTERNATIONAL

      All 63 amp IEC 60309 industrial wiring devices are rated up to 63 amps and approved by UL/CSA for 60 amp service in North America.

      63 AMP MALE PLUGS

      * NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

      63 AMP FEMALE COUPLERS (CONNECTORS)

      * NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

      63 AMP MALE APPLIANCE PLUGS (INLETS)

        * NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

        63 AMP FEMALE PANEL SOCKETS (RECEPTACLES)

        * NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

        125 AMP - IEC 60309 PIN & SLEEVE DEVICES // INTERNATIONAL

        All 125 amp IEC 60309 industrial wiring devices are rated up to 125 amps and approved by UL/CSA for 100 amp service in North America.

        125 AMP MALE PLUGS

        * NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

        125 AMP APPLIANCE PLUGS (Male Inlets)

        * NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

        125 AMP FEMALE COUPLERS (CONNECTORS)

        * NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

        125 AMP FEMALE PANEL SOCKETS (RECEPTACLES)

        * NOTE: Interchangeable with industry part number for application. If attempting to mate with a non-walther part, please speak with a member of our engineering department.

        Surface Mount Receptacles

        20A Surface Mount Receptacles
        60A Surface Mount Receptacles
          30A Surface Mount Receptacles
          100A Surface Mount Receptacles

          All specifications are subject to change without notice. Consult a Walther Electric Engineer for the latest specifications or speak with a member of our Customer Care Team +1 (800) 925-8437. Didn't find what you were looking for? Reach out to our marketing department marketing©waltherelectric.com


          Catalogs & Brochures

          • IEC 60309 Pin & Sleeve Devices (Full Catalog) 6.95 MBWalther's pin & sleeve devices are built to IEC 60309-1 and 60309-2 specifications and are interchangeable with other manufacturers who conform to the IEC standards and color coding system...anywhere in the world.
          • IEC 60309 Part Number Cross Reference Sheet 604 KBWalther offers the widest variety of plugs, receptacles, connectors and inlets made of the highest quality and design integrity in both splash-proof and watertight versions.
          • Cable Assemblies: Industrial Power Solutions Brochure 3.49 MBWalther Electric designs and builds cable assemblies and wiring harnesses from the most basic cable to a complex and challenging design.
          • Cable Protectors Catalog 850 KBA cable raceway or cable bridge is an enclosed conduit that forms a physical pathway for electrical wiring. Cable Raceways protect wires and cables from heat, humidity, corrosion, water intrusion and general physical threats.
          • Cable Protectors: Choosing the right model 1.91 MBCable Protection systems are offered in a variety of sizes to suit all types of INDOOR/OUTDOOR applications